| 产品参数Specification | | 型号 Model | 在线DIP检测AOI QS-D620 | | 供给电源 Input Voltage | AC220V±10% 50/60HZ 1.5KW | | 外型尺寸(长x宽x高)Dimension | 1030x1200x1600mm | | 重量 Weight | About700KG | | 影像识别部
份 Mage
manageme
nt | 光源系统 Light source | RGB+W四色环形光源 LED RGB Ring Light Source | | 检测方法Mage recognition | 轮廓运算、颜色特征抽取、灰阶运算、图像比对等Outline
recognize,color and grey analysis,image comparison | | 影像系统(Camera)Camera | 进口定制500W像素彩色相机High grade imported digital
color CCD camera 5m pixels | | X-Y轴像素分辨率 Resolution for X-
Y axis | 15/20um可选15/20um optional | | 最大允许板弯(翘曲度)Max.Warpage | PCB对角线长度的2%或<5mm 2%of PCB's diagonalor
<5mm | | 检查窗口大小 Inspection window
size | FOV 30x20mm | | 可检视零件最小尺寸Min size
available component | 0201 |
| 机构部份
Hardware | 可检测PCB允许面积
Available PCB size | 最小MIN | 50mmx50mm | | 最大MAX | 400mmx450mm | | PCB厚度范围 PCB Thickness | ≤6mm | | 最大PCB重量 Max PCB weight | ≤3KG | | PCB上下净高Max PCB height | 上面≤85mm,底面≤35mm
Above≤85mm,bottom≤35mm | | PCB挟持端预留间隙 PCB holding edge | ≥3.5mm | | 工作高度 Working height | 传输轨道离地:900±20mm
Transfer track from ground:900±20mm | | PCB传输速度 Conveyor speed | 750mm/s(MAX)750mm/s(MAX) | | PCB流向Conveyor direction | 标配:左-右 选配:右-左
Standard:left-right optional:right-left | | 轨道宽度调节 Conveyor control | 自动 Automatic |
| 软硬件
software | 操作系统 Operating
system | Windows 7以上 Over and above Windows 7 | | 操作界面 Operation
interface | 中英文界面可选 Chinese/English | | 显示器 Monitor | 22英寸液晶显示器 22inch color monitor | | 检查项目 Inspection
item | 锡膏印刷:有无、偏移、少锡、多锡、断路、连锡、污染等。Insufficient
soldering fillet and wetting,open/short.contamination,etc. | | 零件缺陷:缺件、偏移、歪斜、立碑、侧立、翻件、错件(OCV)、破损、
反向等。Comtonents: missing,shifting,skewing、thumb up、side up、turn
over、wrong(OCV)、damage、reversing,soak solder,Glue squeeze-out etc. | | 焊点缺陷:锡多、锡少、虚焊、连锡、铜箔污染等。Soldering:Insufficient
soldering、fake soldering、Blow hole、Bridge between solder joint side、
contamination,etc. | | NG标示NG indication | OK/NG信号,基板ID,基板名称,组件名称,缺陷图片,不良点对应坐标
OK/NG marking,PCB ID,status,comtonent name, status and failure picture,
defective location | | 程序撰写需求数据
Programming | 支持通用组件库和CAD数据导入 Suppot genenal parts library andCAD datainput | | 数据输出格式
Analysis output | 自动生成统计分析SPC及数据报表 Auto create SPC and data | | 脱机编辑软件 Off
line programming | CAD Support(CAD) |
|
